PT. Suplintama MajuSemesta

L53U
Multi Power Transducer with Mods

• Single type module is usable for all of single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems.
• All measured variables can be transmitted to the host PC via RS-485/Modbus RTU.
• Energy count pulse or limit alarm output selectable
• Up to 4 optional analog outputs
• Remote and local programming using the PC Configurator Software
• Input range up to 480 Vac, 1 A or 5 A
• DIN rail mounted

CTS2
High AC Current Transmitter with lntegral Probe

• Detecting high current at the flexible current probe and providing a porportional low-ripple standard signal
• appropriate for computer use
• Wide frequency band can be accepted
• Clipped around a conductor without disconnecting the conductor
• Rogowski coil type
• Isolation up to 2000 V AC
• High-density mounting

CLSC
Clamp-on Current Sensors

• Easy-to-install, clamp-on type current sensor
• Over-voltage clamp element for safety in open circuit
• 1A Output
• Wide frequency band
• Screw terminal connection

CLSE
Clamp-on Current Sensors

• Easy-to-install, spring-loaded, clamp-on type current sensor
• Over-voltage clamp element for safety in open circuit
• Wide frequency band
• Screw terminal connection

IT40SW1/2, IT50SW1/2, IT60SW1/2 Series
Wireless LAN Tower Light
(for use in all EU countries)

• Wireless LAN access point and infrastructure mode
• Energy saving, maintenance free LED lights
• Bright and even illumination thanks to M-System's original reflection system
• Number and color of LED modules can be freely combined
• IP 65

IT40SW5F/6F, IT50SW5F/6F, IT60SW5F/6F Series
Wireless Tower Light
*(this device is approved for use only in the US)

• Licence-free 900 MHz ISM band
• FCC Part 15 compliant wireless module*
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Energy saving, maintenance free LED lights
• Bright and even illumination thanks to M-System's original reflection system
• Number and color of LED modules can be freely combined
• IP 65

IT40SR,IT50SR,IT60SR Series
Open Network Capable Tower Light

• Direct Modbus/TCP and CC-Link control saves wiring and cost
• Energy saving, maintenance free LED lights
• Bright and even illumination thanks to M-System's original reflection system
• Number and color of LED modules can be freely combined
• IP 65

IT40SA, IT50SA, IT60SA Series
Discrete Input Tower Light

• Discrete input tower light
• Energy saving, maintenance free LED lights
• Bright and even illumination thanks to M-System's original reflection system
• Number and color of LED modules can be freely combined
• IP 65

IT60 Series
Open Network Capable/
Discrete Input Tower Light

• Discrete input tower light
• Energy saving, maintenance free LED lights
• Bright and even illumination thanks to M-System's original reflection system
• Number and color of LED modules can be freely combined
• IP 65

M1EA Series
Quad/Octad or Dual/Quad Alarm with OEL Display

• N.O. or N.C. octad alarm or SPDT quad alarm; latching or not (M1EAXV-1, 1 channel)
• N.O. or N.C. quad alarm or SPDT dual alarm; latching or not (M1EAXV-2, 2 channels)
• Output 100, 120, 240 Vac @0.5 A; 30 Vdc @1 A
• 24 Vdc powered
• Local OEL display shows process values
• Intuitive, easy programming
• PC configurator is also available
• Alarm test

M2EA Series
Dual/Quad Alarm with OEL Display

• N.O. or N.C. quad alarm or SPDT dual alarm; latching or not
• Output 100, 120 Vac or 30 Vdc @4 A; 240 Vac @2 A
• 100-240 Vac or 24, 110 Vdc powered
• Local OEL display shows process values
• Intuitive, easy programming
• PC configurator is also available
• Alarm test

AS4 Series
Dual/Quad Alarm

• N.O. or N.C. quad alarm or SPDT dual alarm; latching or not
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-240 Vac or 24, 110 Vdc powered
• Local LED displays
• IP 65

M7E Series
Dual/Quad Alarm with LCD Display

• N.O. or N.C. quad alarm or SPDT dual alarm; latching or not
• Output 100, 120 Vac or 30 Vdc @4 A; 240 Vac @2 A
• 100-240 Vac or 24 Vdc powered
• Local LCD display shows process values
• Intuitive, easy programming just like operating a cell phone
• PC Configurator is also available
• Alarm test

M6S, M6D, M6N Series
Single SPDT Alarm

• SPDT alarm
• Output 30 Vdc @2 A; 250 Vac @2 A
• 24 Vdc powered
• Alarm test

MSEF
DC Input, Dual SPDT Alarm

• Input 4-20 mA, 2-10 mA, 1-5 mA, 0-10 V, 0-5 V, 1-5 Vdc
• SPDT dual alarm; latching or not
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered
• Local LED display

AL-Unit Series
Rotary Switch adj., Direct Sensor Input, SPDT Alarm

• Input DC, T/C, RTD, Pot, Pulse, AC, 2-wire Transmitter
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

A-Unit Series
Potentiometer Adj., Direct Sensor Input, SPDT Alarm

• Input DC, T/C, RTD, Pot, Pulse, AC, 2-wire Transmitter
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

M-PAC Series
Direct Sensor Input, Various SP Control Option, SPDT Alarm

• Input DC, T/C, RTD, Pot, Pulse, AC, 2-wire Transmitter
• SPDT single/dual alarm; latching or no
• Output 120 Vac or 30 Vdc @3 A
• 120, 240 Vac or 12, 24 Vdc powered
• Pot, remote dial or remote 0-1 V input for setpoint control
• Deadband adjustable over entire range (1-100%)

M2AVS
DC Input, Thumbwheel SW Adj., Single DPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• DPDT alarm; latching or no
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-240 Vac or 24 Vdc powered.

KSE
DC Input, Dial Adj., Single or Dual SPDT Alarm

• Input 4-20 mA, 1-5 Vdc
• SPDT single or dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• 100-120 or 200-240 Vac powered

L4AS
DC Input, Single-turn screws or Dial Adj., Quad SPDT Alarm

• Input 4-20 mA, 1-5 Vdc
• SPDT quad or dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• 85-132, 170-264 Vac or 24 Vdc powered

AE-Unit Series
Direct Sensor Input, SPDT plus DC Transmitter Output

• Input DC, T/C, RTD, Pot, Pulse, AC, 2-wire Transmitter
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• Specific DC output range within -10-+12 V or 0-20 mA
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

ASD1
DC Input, Thumbwheel SW Adj.,
Dual SPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• SPDT dual alarm; latching or no
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-120 or 200-240 Vac powered

KSED
DC Input, Thumbwheel SW Adj., Dual SPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-120 or 200-240 Vac powered

M2SED
DC Input, Thumbwheel SW Adj.,
Dual SPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-240 Vac or 24 Vdc powered.

M2AS
DC Input, Thumbwheel SW Adj., Single DPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• DPDT alarm; latching or no
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-240 Vac or 24 Vdc powered.

M2AS1
DC Input, Thumbwheel SW Adj., Single SPDT Alarm

• Input 4-20 mA, 0-10 V, 0-5 V, 1-5 Vdc
• SPDT alarm; latching or no
• Output 120 Vac or 30 Vdc @5 A; 240 Vac @2.5 A
• 100-240 Vac or 24 Vdc powered.

AYDV
Two DC Input Deviation Alarm

• Input 1-5 V, 4-20 mA, 10-50 mA
• SPDT dual alarm
• Output 120 Vac or 30 Vdc @1 A; 240 Vac @0.5 A
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

R6 Series
Ultra Slim, Mixed Signal Remote I/O

• Only 78 mm (3.07 in) wide with the minimum system of 8 modules (for R6S / R6D)
• Selectable connection method Tension-Clamp, Screw terminal or Euro terminal
• Analog I/O range selectable with the built-in DIP switches
• Low power consumption

R7 Series
Expendable, Compact Remote I/O

• Palm-top size compact module can handle 4 analog input, 2 analog output or 8/16 discrete signals
• 8 or 16 discrete input/output module can be attached to the base module
• 1500 Vac isolation

R7K4FE Series
Compact Remote I/O

• Modbus/TCP (Ethernet) I/O module, R7K4FE interfaces discrete I/Os and PLC or PC via Modbus/TCP (Ethernet).
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4FML3 Series
Compact Remote I/O

• MECHATROLINK I/O module, R7K4FML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4JML3 Series
Compact Remote I/O

• MECHATROLINK I/O module, R7K4JML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Tension clamp terminal block for I/O.

R7G4FML3 Series
Compact Remote I/O

• MECHATROLINK I/O module, R7G4FML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring. (Screw terminal block)

R7G4HML3 Series
Compact Remote I/O

• MECHATROLINK I/O module, R7G4HML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7F4HML3 Series
Compact Remote I/O

• MECHATROLINK I/O module, R7F4HML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• MIL connector for I/O

R7G4FML3 Series
Compact Remote I/O

• R7K4FML, complying with MECHATROLINK–I/–II and Simple I/O, interfaces discrete I/Os and PLC or PC via MECHATROLINK.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4DML Series
Compact Remote I/O

• R7K4DML, complying with MECHATROLINK-I/-II Simple I/O specifications, interfaces discrete I/Os via PLC or PC, and MECHATROLINK.
• e-CON (mini-clamp) connector for I/O

R7G4HML Series
Compact Remote I/O

• MECHATROLINK I/O module, R7G4HML interfaces discrete I/Os and PLC or PC via MECHATROLINK-I/-II.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7I4DECT Series
Compact Remote I/O

• The R7I4DECT interfaces between I/O signals and a PLC via EtherCAT. EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
• e-CON (mini-clamp) connector for I/O

R7G4HEIP Series
Compact Remote I/O

• Interfaces PLC (programmable logic controller) and discrete I/Os via EtherNet/IP.
• Supports DLR (Device Level Ring) to form a ring topology.
• Employs a removable two-piece terminal block that allows module replacement without disconnecting wiring.

F7F4DH Series
Compact Remote I/O

• Compact, all-in-one package
• 16 discrete inputs or outputs and 8 discrete I/O modules selectable
• Easy-to-wire connection typically used for machinery control:
• Mini-clamp (e-CON) connector
• MIL connector
• Spring cage (tension clamp) type terminal

R7K4DH Series
Compact Remote I/O

• HLS (Hi-speed Link System) for FA Machinery Control
• The R7K4DH interfaces discrete I/O signals with a PLC via HLS (HLS is the abbreviation for "Hi-speed Link System" of Step Technica Co., Ltd.)
• e-CON (mini-clamp) connector for I/O

R7G4HH Series
Compact Remote I/O

• The R7G4HH interfaces analog I/O signals with a PLC via HLS. (HLS is the abbreviation for “Hi-speed Link System” of Step Technica Co., Ltd.)
• High-speed response
• Ch-to-ch isolation
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R3 Series
Multi-Channel, Mixed Signal Remote I/O

• Wide selection of I/O modules including DC, AC, temperature, strain gauge, pulse trains, AC power, etc.
• Selections of AC power, CT and VT modules suitable for energy monitoring applications
• Dual redundant communication networks and power supplies

R30 Series
Compact, Mixed Signal Remote I/O

• Compact size
• High speed bus
• Wide selection of I/O modules and network modules

R80 Series
Slice Type, Mixed Signal Remote I/O

• 'Slice type' modules can be freely added by necessary number of I/O points, saving installation space to the minimum
• Only 55 mm deep modules (except connector)
• Easy I/O terminal access via e-CON (mini-clamp) connector or MIL connector

R8 Series
Slice Type, Mixed Signal Remote I/O

• 'Slice type' modules can be freely added by necessary number of I/O points, saving installation space to the minimum
• Only 55 mm deep modules (except connector)
• Easy I/O terminal access via e-CON (mini-clamp) connector or MIL connector

R5 Series
Compact, Mixed Signal Remote I/O

• Free combination of I/O modules, network modules and power modules
• Dual redundant communication networks and power supplies
• 2 fully-isolated analog I/O per module
• Re-transmitted output modules suitable for extra field monitoring

R1 Series
Compact, Multi Point Remote I/O

• Economical all-in-one module for Modbus, DeviceNet and CC-Link
• 12-point universal input module
• 8-point RTD/Pot input module
• 4-point totalized counter input, 8 contact I/O module
• 32-point discrete I/O modules
• Trigger contact input and alarm contact output

HUB Module
for Remote I/O

• The HUB Module extends total length of network cable and branch cable.

CC-LINK Master Module
Remote I/O FAM Series

• Yokogawa Electric PLC (FA-M3V) use.
• CC-Link: Ver. 1.10/2.00
• Supported slave station: Remote I/O station, Remote device station
• Configurator software (model: FAMCLCFG)

WL40F Series
900 MHz Band Wireless I/O
(for use in the US)

• WL40F Series Licence-free 900 MHz ISM band
• FCC Part 15 compliant wireless module*
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40F Series ideal for data gathering for AGVs.

*This Device is approved for use only in the US.

WL40TH Series
920 MHz Band Wireless I/O
(for use in Thailand)

• WL40TH Series Licence-free 920 MHz ISM band
• NBTC, Thailand Radio Waves Act wireless module*
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40TH Series ideal for data gathering for AGVs.

*This Device is approved for use only in the Thailand.

73VR Series
Paperless Recorder

• Touch panel operation
• Selectable number of pens to display
• 5.5-inch TFT color display with backlight
• Selectable chart colors available
  White or from blue to black (plain light, plain dark or gradation)
• IP65 front cover

71VR1
Compact Paperless Recorder

• 1/4 DIN size (96 x 96 mm) panel mount compact recorder
• 3.5 inch TFT color LCD display
• Max. 8-point each of analog and discrete inputs are stored, displayed and alerted.

TR 30
Paperless Recorder

• Compact package
• No need of dedicated application software other than a web browser
• Flexible built-in I/O modules plus Modbus slave I/O

MSR128LS/MSR128LV
PC Recorder Light

• Ideal for basic logging and trending purposes.
• Maximum sampling rate of 50 ms for 8 channels, 500 ms to 1 minute for the total of 120 channels.

MSR 128
Full Featured PC Recorder Software

• Ideal for logging, trending and analyzing continuous process and batch applications.
• Up to 128 channels can be monitored simultaneously.
• Maximum sampling rate of 500 ms for 128 channels.
• High speed sampling 100 ms with R3 series TCP/IP module.

MSRpro
Client / Server System High
Performance PC Recorder

• Max. 2048 points.
• High speed 100 msec. mode up to 256 points.
• Active trend view to compare in real time past and present data overlapped on each other.
• Arithmetic and logic functions, including the ones performed between channels.
• Alarm history and data search functions.

R1M Series
RS-485 I/O Modules

• 16-point DC and TC inputs, 8-point RTD & potentiometer inputs, or 32-point discrete I/O; networked via RS-485 / Modbus RTU

RZ Series
12 Universal Input Module

• 12-point Universal Input
• 12-point universal inputs independently configurable for each input
• Supports 13 TC types, 12 RTD types, potentiometer and ±12 Vdc inputs
• Easily expandable via RS-485

R2M Series
RS-232 Modules

• 8-point DC and TC inputs; connected via RS-232C / Modbus RTU

DL 30 Series
Web Enabled Remote Terminal Unit

• The DL30-G is a data logger of onsite-installation type incorporating versatile functions, including a remote monitoring function, data logging function, and event reporting function, available through a website screen as well as a report creation function.
• R30 Series remote I/O modules available to accept a wide variety of field signals

DL8 Series
Web Enabled Remote Terminal Unit

• Use internet and your own smart phone to build up remote monitoring system
• Simple remote monitoring via internet without needing to build up a complex PC based system
• R8 Series remote I/O modules available to accept a wide variety of field signals

GR8 Series
Communication Adaptor

• Bidirectional protocol converter for Modbus/TCP (Ethernet) and Modbus RTU (RS-485)
• Fast response time thanks to the Cache function
• Available the type designed to connect to DL8 and R8 series modules

SC Series
Multi-Function PID Controllers

• 72 x 144 mm DIN format standard panel size
• 2 x universal inputs, 4 x analog inputs, 5 x contact or pulse inputs, 1 x high speed pulse input
• Two loops of PID control
• DCS in instrument format Advanced computation and sequential control functions by combining a wide variety of function blocks

SD10 Series
Bargraph Indicating Alarm

• 72 x 144 mm DIN format standard panel size
• Red, Amber, Green, Blue or Multicolor (red/orange/green) LED
• 3 input channels
• Clear 4-digit digital meter
• 4-alarm contact outputs
• IP55 front cover

GR8 Series
Communication Adaptor

• Manual loader with backup
• 72 x 144 mm DIN format standard panel size
• Red, Amber, Green, Blue LED
• Clear 4-digit digital meter
• IP55 front cover

BA8 Series
Direct I/O Compatible with BACnet

• This Remote I/O model is compatible with BACnet as a de facto standard communication protocol for building automation.

TC10 Series
TC10EM
(Modbus, size 96x96cm)

• Two PID controllers
• Universal input x 2 points, control output x 4 points, discrete input x 2 points, clamp-on current sensor input x 2 points
• 2 universal inputs configurable to T/C, RTD, DC current or voltage independently
• W96 × H96 × D108 mm (W3.8" × H3.8" × D4.25")

TC10 Series
TC10NM
(Modbus, size 48x96cm)

• One PID controller
• Universal input x 1 point, control output x 4 points, discrete input x 2 points, clamp-on current sensor input x 1point
• Universal input configurable to T/C, RTD, DC current or voltage independently
• W48 × H96 × D108 mm (W1.89" × H3.8" × D4.25")

R3 Series - R3-TC2
Temperature Control Module

• Two PID controllers
• Universal input x 2 points, control output x 4 points, discrete input x 2 points, clamp-on current sensor input x 2 points
• 2 universal inputs configurable to T/C, RTD, DC current or voltage independently
• Configurable with PC configurator (model: R3CON)

R8 Series
R8-TC2
Temperature Control Module

• Two PID controllers
• Universal input x 2 points, control output x 2 points, clamp -on current sensor input x 2 points
• 2 universal inputs configurable to T/C, RTD, DC current or voltage independently
• Configurable with PC configurator (model: R8CFG)

MSP Series
Compact Linear Motion
Electric Actuators

• High resolution positioning for better valve control
• Built-in feedback positioner and electric limiter
• Brushless stepping motor assures long-life operation
• 1/1000 resolution
• Optional interface with CC-Link or DeviceNet

PSN Series for thrust 3000-5000N
CSP Series for thrust 12000N

PSN Series :
• Brushless position sensor eliminates problems with mechanical potentiometer feedback sensing
• Opening/closing speed, split range and failsafe position programmable by hand-held programmer
• Internal temperature sensor to control heater in cold climate and to prevent motor from overheating
• Forced-open/-closed contacts for remote or manual override

CSP Series :
• Suitable for high thrust / long stroke applications

MRP Series for torque 5-33N
Compact Rotary Motion
Electric Actuators

• High resolution positioning for better valve control
• Built-in feedback positioner and electric limiter
• Brushless stepping motor assures long-life operation
• 1/1000 resolution

PRP Series for torque 100-600Nm
High Torque Rotary Motion Electric Actuators

• Brushless high-resolution DC stepping motor assures long-life operation
• Opening/closing speed, split range and failsafe position programmable by hand-held programmer
• Temperature sensor helps to reduce overall power consumption by activating heating function only in low temperature
• 1/1000 resolution
• Planetary gear mechanism realizing the compact package with the maximum torque of 600 Nm (model: PRP-2)

JB2
Analog Backup Station

• Holding MV output signal from DCS, PLC or a controller and enabling manual control of a final control element
• CAS input signal passes through during auto operation.
• MV output modes in case of abnormality in the controller: Holding CAS input status Holding CAS input status of the moment reversing back for preset time Preset MV output
• Bumpless transition
• Isolated re-transmitted output
• 15 – 35 Vdc powered

AB2
Analog Backup Station

• Holds and manipulates control signals in case of computer or DCS failure
• Specific input within ±300 V; current input with a resistor
• Specific output range within 0-20 mA or -10 to +12 Vdc
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered
• Ramp rate adjustable

CB2
Analog Backup Station

• Holds and manipulates control signals in case of computer or DCS failure
• Specific output range within 0-20 mA or -10 to +12 Vdc
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered
• Ramp rate adjustable

MXAB
Analog Backup Station
with LED Display

• Manipulates control signals from a computer or DCS
• Manual control in case of computer/DCS failure
• Input range selectable within +/-30 V
• Output selectable within 0-20 mA and +/-10 V
• 100-240 Vac, 12-24 Vdc, or 110 Vdc powered
• Restarts at the last stored value before power failure
• Ramp rate adjustable

MXCB
Computer Backup Station
with LED Display

• Manipulates/holds analog signals via contact input from a computer
• Manual control available by the ‘Soft-Terminal’ indicator/controller (model: ST/STL).
• Output selectable within 0-20 mA and +/-10 V
• 100-240 Vac, 12-24 Vdc, or 110 Vdc powered
• Restarts at the last stored value before power failure

ABF3
Analog Backup Station
with Front Manual Loading Controls

• Holds and manipulates control signals in case of computer or DCS failure
• Specific output range within 0-20 mA or -10 to +12 Vdc
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered
• Ramp rate adjustable

MAA
Power Supply

• 120/240 Vac power supplies up to 5 amps

MDM2A
Power Supply

• 4-20 mAdc and pulse signal line

MAAC
Power Supply

• 4-/2-wire transmitters 120/240 Vac power supplies
• Surge counter function

MDPA
Sensor

• 4-20 mAdc and pulse signal line

MD7AST
Sensor

• 4-20 mAdc and pulse signal line

MDCAT
Transmission Line

• Designed specifically for Ethernet network
• Conforms with 1000 Base-T, PoE and PoE Plus