Fire and Gas Solutions
Searchline Excel Open Path Infrared Gas Detector
World-renowned infrared open path flammable gas detector offering unrivalled performance and sensitivity.
- Fast speed of response provides earliest warning
- High sensitivity allows low alarm set points
- Works in inert atmospheres
Features & Benefits
Searchpoint Optima Plus Point Infrared Gas Detector
Infrared point hydrocarbon gas detector certified for use in potentially explosive atmospheres
- Over 100,000 units installed worldwide
- Improved reliability
- Fast speed of response
- IEC61508 Safety Integrity Level 2 independently assessed by TÜV
Features & Benefits
Searchzone Sonic™
Infrared Gas Detector
The new Searchzone Sonik acoustic gas leak detector complements Honeywell’s established portfolio of gas detection devices, adding ultrasonic technology to a reliable mix of point and open-path gas detectors. Thanks to its robust sealed solid-state sensor that doesn’t need calibration and can withstand the harshest weather conditions, the Searchzone Sonik delivers reliable gas leak detection, even in the noisiest environments, prevents false alarms, and reduces the cost of ownership. A sophisticated App on a hazardous area Bluetooth device delivers remote access for set-up, interrogation and maintenance, supported by an advanced test-tool enabling testing from the ground - no need to work at height.
- Features & Benefits
- Maximizes the safety and efficiency of your mix of fixed gas detectors
- Provides reliable gas leak detection in a wide range of applications and working environments
- Minimizes the risks of false alarms
- Enables quicker, easier installation
- Minimizes cost of ownership and saves time
- Increases ease of use with advanced set-up and test tools.
Sensepoint XRL
Sensepoint XRL
Thanks to Honeywell’s use of Bluetooth Low Energy (BLE) technology, you can install, commission and maintain your Sensepoint XRL gas detector — all from the palm of your hand.
Simply pair the detector with your smartphone; then use Honeywell’s Sensepoint gas detector app to wirelessly perform many tasks — from adjusting set points to checking fault codes — from up to 10 metres away.
Sensepoint XRL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in industrial facilities.
- Manage installation, commissioning and maintenance from the gas detector app on your smartphone or tablet
- Award-winning design
- Robust aluminum housing
- Worldwide hazardous area approvals
- Compatible with Touchpoint Plus and other industry-standard controllers
Features & Benefits
Sensepoint
Flammable & Toxic
Gas Detector
ATEX certified flammable, toxic and oxygen gas detectors that offer a high-quality, low-cost solution to monitoring hazardous areas.
- Proven Surecell™ electrochemical sensors
- Fast and reliable
- Minimal training required
Features & Benefits
VENTI5® PRO5 Personal
Multi-Gas Monitor
The Ventis Pro5 multi-gas monitor is the most flexible connected monitor on the market, giving you the power to manage worker safety anytime, anywhere – even in the most remote settings. Wireless connectivity in the Ventis Pro5 connects workers to live monitoring software via cellular, wi-fi, satellite, or to peers on-site through LENS Wireless.
- With Ventis Pro5, your workers will be safer than ever before.
- Take the guesswork out of gas detection by setting custom, actionable alarms for up to five of the following gases: LEL (Methane), LEL (Pentane), Cl2, CO, H2S, HCN, NO2, NH3, O2, PH3, SO2
- See all your people in one place with flexible, automatic connectivity to iNet Now live monitoring via cellular, wi-fi, or satellite
- Share real-time gas readings, man-down, and panic alarms between peers, so the entire team knows who is in danger and why
- Improve asset management by programmatically assigning monitors to your team, so you know who had the monitor when it went into alarm or when it went missing
- Reduce human error with clear instructions (EVACUATE) when an instrument goes into alarm
- Reduce the risk and cost of having different devices in the field by using one multi-purpose gas monitor across your site for everything from personal monitoring to confined space entry
- Endure the harshest conditions thanks to an IP68 rating backed by a Guaranteed for Life™ warranty
VENTIS® MX4 Personal
Multi-Gas Monitor
Get the simple, reliable gas detection you need with the Ventis MX4, a four-gas monitor with the portability and size of a single-gas monitor. Designed to be extremely rugged yet lightweight and easy to wear, the Ventis MX4 eliminates the need for extra monitors and transitions seamlessly from personal monitoring to confined space entry thanks to the Ventis® Slide-on Pump. When your shift is over, maintenance, reporting, and data tracking are fast and easy with a DSXi Docking Station and iNet® Control software.
- Eliminate the need for two monitors by using Ventis MX4 for personal monitoring and confined space entry
- Choose your run time with 12-hour, 18-hour, or 20-hour batteries for non-pumped instruments
- Personalize devices for your needs by selecting alarm thresholds, setting latch alarms, disabling the ability to power off while the instrument is in alarm, and more
- Backed by a 4-year warranty for monitor and standard four-gas sensors
- Monitor up to four of the following gases: LEL (Methane), LEL (Pentane), CO, H2S, O2, CO/H2 Low, SO2, NO2
Tango TX1
Single-Gas Monitor
Experience maintenance-free gas detection and improved worker safety with the Tango®TX1 single gas monitor. A 2-year runtime and patented DualSense® Technology, increase worker safety, regardless of bump test frequency, while reducing overall costs. Simply put, with two of the same sensor, the Tango TX1 is one of the safest single gas detectors available today.
- Lightweight and wearable personal gas monitor
- DualSense Technology increases worker safety by using two sensors to detect the same gas
- Spend less time replacing equipment thanks to the industry's only Guaranteed for Life™ single-gas monitor
- Optional AlarmAmp™ increases audible alarms to 110dB
GASBADGE® PRO
Single-Gas Monitor
Built to Industrial Scientific’s highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection. Interchangeable sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen.
- Full-featured, single gas detecto
- Guaranteed for Life™ warranty
- Simplify maintenance and reporting with the DSXi Docking Station
MX6 IBRID
Six-Gas Monitor
The MX6 iBrid® is the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations and a robust list of available configuration settings, the MX6 iBrid gas detector is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).
- Monitor up to six gases
- Tailor for your unique application with 24 sensor options including PID and IR
- Prescreen entries for benzene with an optional convertible kit
- Simplify maintenance and reporting with the DSXi Docking Station
SM87PB
Alarm Call Points
These manual fire alarm, emergency shutdown pushbutton units have been designed for the most arduous environmental conditions. The units are both easy to install and maintain. Intrinsically safe Exia and flameproof Exd versions of each model are available. A choice of either stainless steel or alloy makes the range suitable for either the offshore or onshore industries.
SM87BG
Alarm Call Points
These manual fire alarm, emergency shutdown breakglass and pushbutton units have been designed for the most arduous environmental conditions. The units are both easy to install and maintain. Intrinsically safe Exia and flameproof Exd versions of each model are available. A choice of either stainless steel or alloy makes the range suitable for either the offshore or onshore industries.
BG3W Callpoint
BG3W Callpoint
This manual fire alarm call point is designed in accordance with the latest draft European Call Point Standard (EN54-11).
Weatherproof to IP66 and IP67 and available certified intrinsically safe, simple apparatus or uncertified, the units are manufactured from glass reinforced polyester (GRP) which provides a robust, corrosion free construction and ensures effective and reliable operation in harsh industrial and offshore environments.
Units are supplied in natural red GRP or painted to customer specification. 'Burning House' duty label is provided as standard, other duty and tag labels may be supplied to customer specification.
DB1/SM87XHB
Sounder-Beacon Combination
This range of audio/visual combination units may be assembled from Cooper MEDC’s range of beacons and sounders. Mounted on a sturdy, drilled, painted, stainless steel plate, the units are pre-wired as standard such that a single input operates both the sounder and beacon simultaneously.
Units are available for use in potentially explosive atmospheres and dedicated units are now available for use in industrial and marine environments.
DB3/SM87XHB
Sounder-Beacon Combination Unit
This range of audio/visual combination units may be assembled from Cooper MEDC’s range of beacons and sounders. Mounted on a sturdy, drilled, painted, 316 stainless steel plate, the units are pre-wired as standard such that a single input operates both the sounder and beacon simultaneously.
Units are available for use in potentially explosive atmospheres and dedicated units are now available for use in industrial and marine environments.
DB12/XB13 Sounder-Beacon Combination
This range of audio/visual combination units may be assembled from Cooper MEDC’s range of beacons and sounders. Mounted on a sturdy, drilled, painted, 316 stainless steel plate, the units are pre-wired as standard such that a single input operates both the sounder and beacon simultaneously.
Units are available for use in Harsh Industrial and Marine environments.
DB 15
Sounders/Horns
This range of sounders have been specially designed for use in demanding industrial and marine environments where a robust construction and high ingress protection rating is required.
The body is manufactured completely from a UV stable glass reinforced polyester which is also highly flame retardant and impact resistant. Stainless steel screws are incorporated thus ensuring a corrosion free product.
Cooper MEDC can also provide a range of sounders suitable for use in potentially explosive atmospheres.
DB 12
Sounders/Horns
This range of sounders has been specially designed for use in demanding industrial and marine environments where a robust construction and high ingress protection rating is required.
The body is manufactured completely from a UV stable glass reinforced polyester which is also highly flame retardant and impact resistant. Stainless steel screws are incorporated thus ensuring a corrosion free product.
Cooper MEDC can also provide a range of sounders suitable for use in potentially explosive atmospheres.
FyreLine Digital Controller
The Digital Interface Monitor Module (DiMM) is a dual zone module for monitoring up to two zones of Digital Linear Heat Detection (DLHD) Cable.
If an overheat or fire situation triggers either zone of the Digital LHD cable, the unit automatically calculates and displays the distance along the cable, in feet and metres, to the alarm point. The two zones can operate independently of each other, or in interlock mode and a separate alarm and normally conducting fault output are provided for each zone.
The unit is intended to be installed between the FyreLine Digital Linear Heat Detection cable and a conventional or addressable fire alarm control panel. It has power, fault and alarm lights, as well as volt free outputs for fault and alarm, corresponding to each zone. It may also be connected to an industrial process control system using the two wire RS-485 Modbus RTU output.
- Features :
- Dual Zones, can monitor 2 digital cables
- Interlock / Coincidence detection
- Display distances to the alarm point in feets or meters
- RS-485 communication
- UL Approved
FyreLine Analogue Controller
The analogue control module is designed for use with FyreLine Analogue Linear Heat Detection cables. The control module interfaces between a fire alarm control panel or addressable module and a single zone of Analogue Linear Heat Detection cable.
The control module monitors the resistance of specially doped polymers within the sensor cable which change as a function of temperature. An abnormal change in resistance along the detection cable triggers either a pre-alarm or alarm on the interface module. The unit is intended to be simple and straightforward to install. Commissioning of the controller can be done using a standard laptop computer or a built-in self-programming module.
The Analogue control module complies with the latest standards and is housed in an IP66 rated enclosure.
- Features :
- UL 521 approved and compliant with the EN54:22 draft standard
- Self-restorable analogue type system with optional pre-alarm setting
- Cable based sensing allows detection at the point of risk
- Low installation, maintenance and repair costs
- Reliable solution for hazardous areas
FyreLine Digital
Stainless Steel LHD Cable
The stainless steel braided linear heat detection cable provides the ideal solution for areas where the cable may be accidentally cut or where it may be subject to mechanical abrasion.
- Features :
- UL 521 approved
- Cable based sensing allows detection at the point of risk
- Low installation, maintenance and repair costs
- Reliable solution for hazardous areas
- Low material cost
FyreLine Digital PVC LHD Cable
- Features :
- Improved testing and maintenance functionality
- Cable based sensing allows detection at the point of risks
- Low installation, maintenance and repair costs
- Reliable solution for hazardous areas
- Low material cost
FyreLine Digital High Temperature LHD Cable
The High Temperature coated linear heat cable is manufactured from two different types of nylon, with the outer sheath being a chemical resistant material. Commonly used in high temperature areas, hazardous and safe areas where chemicals such as hydrocarbon fuel oils, diesel, kerosene etc. are present.
- Features :
- UL 521 approved
- Cable based sensing allows detection at the point of risk
- Low installation, maintenance and repair costs
- Reliable solution for hazardous areas
- Low material cost
20/20 MPI
Commercial IR3
Flame Detector
The 20/20MPI is a low cost, high performance, compact Triple IR (IR3) Flame Detector in a lightweight polycarbonate housing. It retains all the benefits of IR3 technology - long distance detection (up to 140ft / 43m) along with the highest immunity to false alarms.
The IR3 detector, with its lightweight housing and low power consumption, is especially suited to indoor applications, such as airport terminals, train stations, storage areas, public buildings and many more.
- Features :
- Long distance Flame Detection (up to 140ft / 43m)
- Large Field of View (100° horizontal / 90° vertical)
- Highest immunity to false alarms
- Output options (two models): Alarm and Fault relay outputs (4 wire) Stepped mA output (3 wire source)
- RS-485 Modbus Compatible
- Automatic and Manual Built-In-Test (BIT)
- 3 Year Warranty
20/20ML
Mini UV/IR
Flame Detector
The low cost, compact, lightweight 20/20ML UV/IR Flame Detector comprises both UV and IR sensors, detecting hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, as well as metal and inorganic fires at distances up to 50 ft (15 m). The UV sensor incorporates a special logic circuit that helps prevent false alarms caused by solar radiation. Simultaneous detection of radiant energy in both the UV and IR sensors triggers an alarm signal.
- Features:
- UV/IR Dual-Sensor
- High-Speed Response
- Large Field of View (100° horizontal/vertical)
- User Programmable Functions Configurable via software from a PC or handheld device
- Immune to False Alarms (solar blind)
- Automatic and Manual Built-In-Test (BIT)
- Standard 4-wire Connection
- 4-20mA source (3-4 wires) configuration
- RS-485 Modbus Compatible
- MTBF Minimum 100,000 Hours
- 3-Year Warranty
20/20MI
Mini Triple IR(IR3)
Flame Detector
The 20/20MI is an economical and compact Triple IR (IR3) Flame Detector with the highest immunity to false alarms, in a rugged stainless steel housing.
- Features:
- Triple Spectrum Design
- 80% Less Power Consumption
- Highly Immune to False Alarms
- Large Field of View (100° horizontal/vertical)
- Sensitivity Selection
- User-Programmable Functions Configurable via software from a PC or handheld device
- Automatic and Manual Built-In-Test (BIT)
- Standard 4-Wire Connection
- 4-20mA Sink or Source (3-4 wires) Configuration
- RS-485 Modbus Compatible
- MTBF Minimum 100,000 Hours
- 3-Year Warranty
40/40M Multi IR
Flame Detector
The 40/40M Multi IR Flame Detector is specifically designed for detection of hydrocarbon and hydrogen flames. It detects hydrocarbon-based fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40M can detect a gasoline pan fire at 215 ft (65m) or a hydrogen flame at 125 ft (38m) in less than 5 seconds.
- Features:
- Multi spectrum design - for long distance detection of hydrocarbons and hydrogen flames
- High false alarm immunity
- Sensitivity selection - to ensure no zone crossover detection
- Automatic and Manual Built-In-Test (BIT) - to assure continued reliable operation
- Heated window - for operation in harsh weather conditions (snow, ice, condensation)
- Multiple output options for maximum flexibility and compatibility
- Relays (3) for Alarm, Fault and Auxiliary
- 0-20mA (stepped)
- HART Protocol for maintenance and asset management
- RS-485, Modbus Compatible
- High Reliability - MTBF - minimum 150,000 hours
- Approved to Safety Integrity Level 2 (SIL2 - TUV)
- 5-Year Warranty
- User Programmable via HART or RS-485
- Hazardous area zones:
- Zones 1 & 2 with IIC gas group vapors present
- Zones 21 & 22 with IIIC dust type present
- Ex approved to:
- ATEX & IECEx
- FM/FMC/CSA
- TR CU (EAC)
- 3rd party Performance tested
- EN54-10 (VdS)
- FM3260
- Reliability
- IEC61508 - SIL2 (TUV)
40/40M Ultra Fast Triple IR(IR3)
Flame Detector
The 40/40UFI, an Ultra-Fast multispectrum IR3 Flame Detector, detects hydrocarbon fuel and gas fires at long distances, and is especially designed to detect an explosive 1 ft (0.3m) diameter gas cloud explosion in max. 50 msecs for 1ft diameter sphere methane-air mixture explosion at 66 ft (20m) with the highest immunity to false alarms. The 40/40UFI IR3 can also detect a 1 ft2 (0.1m2) gasoline/n-Heptane pan fire at up to 300 ft (90m).
- Features:
- Multi spectrum design - for long distance detection of hydrocarbons and hydrogen flames
- High Speed Response - 50 msec
- Sensitivity selection - to ensure no zone crossover detection
- Automatic and Manual Built-In-Test (BIT) - to assure continued reliable operation
- Heated window - for operation in harsh weather conditions (snow, ice, condensation)
- Multiple output options for maximum flexibility and compatibility
- Relays (3) for Alarm, Fault and Auxiliary
- Analogue output for fast detection
- 0-20mA (stepped)
- HART Protocol for maintenance and asset management
- RS-485, Modbus Compatible
- High Reliability - MTBF - minimum 150,000 hours
- Safety Integrity Level SIL2 (TUV)
- 5-Year Warranty
- User Programmable via HART or RS-485
- Hazardous area zones:
- Zones 1 & 2 with IIC gas group vapors present
- Zones 21 & 22 with IIIC dust type present
- Ex approved to:
- ATEX & IECEx
- FM/FMC/CSA
- TR CU (EAC)
- 3rd party Performance tested
- EN54-10 (VdS)
- FM3260
700 Series Regulator
The most popular regulators supplied by Calgaz is the 700 series. These fixed flow regulators are preset and fully flow checked at the factory ensuring they reach you perfectly calibrated for your needs.
1000 Series Regulator
The 800 series regulators have 4 different models including low/high-pressure applications and brass/stainless steel body. These variflow regulators can have selectable flow rates.
2000 Series Regulator
The Demand Flow Regulator is designed to work with pumped instruments. The regulator enables gas to flow when a vacuum exceeding 3” water gauge is pulled by the instrument. The regulator allows the calibration gas to flow at the rate required by the instrument, automatically cutting off the flow when the instrument is switched off.
Eco-Trigger Regulator
The Eco-Trigger Regulator has been designed to meet the needs of the Eco-Bump cylinder. Offering a simple and easy solution for bump or function testing. Operation is by an easy to use thumb operated paddle trigger.
R Series Regulator
The R21 is a single-stage, high purity regulator, designed for applications where low flow is required. The R31 is a dual-stage, high purity style regulator, designed for applications where a consistent outlet pressure and flow is desired. Both R21 and R31 are available in nickel-plated brass and stainless steel.
CS Electronic Siren
Electronic Siren CS is a high performance siren with an audible range up to 2.5km. Each siren can be fitted with up to 6 Class D amplifiers with a total capacity of 1800watt and with up to 18 horns.
- In addition it can interface with a broad range of networks such as:
- VHF/UHF
- Fiber Optics
- TCP/IP
- Wi-Fi
- GSM
- Long Distance Networks
- Long Distance Networks
SoundBox Electronic Siren
The soundbox is a cost-effective electronic siren solution for facilities that do not require audible coverage at long distances. The electric cabinet of the siren is compact, light and combined with uniquely designed aluminum speakers offering 360 degrees audio coverage.
It also supports wireless activation panels and remote activation or voice announcements via GSM network, limiting the need of installing new network cables.
